Racks Point Logo
My Account 🛒 My Cart (0)

Beam for Industrial Shelving · Horizontal 948 mm

Initializing technical configurator...

Description · Beam for Industrial Shelving

The shelving beam is an essential component for the rigidity and stability of your storage system. Designed to reinforce the structure of the upright frames, this 948 mm horizontal beam, made of high-strength steel and finished in blue, significantly improves load capacity and prevents deformation. Its installation is simple and adds an extra layer of safety and durability to your equipment, optimizing space in your warehouse or workshop.

The rigidity and stability of your storage system are significantly reinforced with this shelf bracing. Designed to integrate perfectly into the structure of pallet racking frames, this 948 mm horizontal component is key to preventing deformation and ensuring the nominal load capacity of each level. Its distinctive blue finish not only facilitates identification within your equipment but also contributes to clear visual organization in your warehouse or workshop. The correct installation of this shelf bracing is fundamental to maintaining the integrity of your infrastructure, especially if you handle heavy loads or if your work areas are frequently trafficked, thus ensuring greater operational safety.

This shelf bracing is a vital element for the longevity and optimal performance of your storage structures. By uniformly distributing stresses along the uprights, it effectively prevents buckling and ensures that each level can support its designated weight without risk. Its design is intended for simple and quick assembly, making it a practical solution for reinforcing or renovating existing installations. Whether you need to improve the robustness of a warehouse, a mechanical workshop, or a specific storage area with high load requirements, this accessory provides additional peace of mind about the solidity of your equipment. Consider adding protective accessories, such as upright protectors, for complete defense against impacts.

The installation of this shelf bracing directly contributes to the durability and safety of your logistics space. By improving the cohesion between the vertical components, the overall resistance of the system is optimized. This type of horizontal reinforcement is a smart preventive measure that extends the service life of your structures, avoiding costly repairs or replacements in the long term. It is a wise choice for those seeking to maximize efficiency and minimize risks in dynamic work environments. The robustness provided by this shelf bracing is a determining factor in maintaining a constant and safe workflow.

Frequently asked questions

What is the length of this shelving beam and for what type of this model is it designed?
The shelving beam has a length of 948 mm and is designed to reinforce the structure of this model. It is made of high-strength steel with a blue finish.
How much load can each level of a shelving unit equipped with this beam support?
The load capacity per level will depend on the complete configuration of the shelving unit and the weight the uprights can support. This beam helps maintain structural integrity so that each level functions according to the system specifications.
How many beams are needed per level and per module to ensure the stability of the structure?
The number of beams per level and module varies according to the specific design of the shelving unit. This component is intended to reinforce the connection between the uprights, contributing to the overall stability of the assembly.
What loading height can be reached with this shelving beam, measured from the floor?
The reachable loading height is not directly determined by the beam, but by the total height of the uprights and the shelving unit's level configuration. This beam contributes to the safety of the established heights.
How many pallets fit in a shelving unit module and what is the maximum weight the entire unit supports?
The number of pallets per module and the total load of the assembly depend on the module dimensions and the specified capacity for the complete shelving unit. This beam reinforces the structure to support the intended loads.
How is this shelving beam mounted and does it require any special anchors?
The installation of this beam is simple and is done within existing systems. It does not require special anchors, as its function is internal reinforcement between the uprights.
What accessories are compatible with this shelving beam, such as guards or wooden shelves?
This beam is a structural reinforcement component. It can be complemented with upright guards, such as L-shaped upright protectors, for comprehensive system protection.
How does a 948 mm shelving beam differ from one with more or fewer levels in the same structure?
The 948 mm length refers to the specific measurement of this horizontal beam. The number of levels and the overall configuration of the shelving unit determine the need and type of beams used for its stability.

Applicable regulations in Ireland · Beam for Industrial Shelving · Horizontal 948 mm

Pallet racking and forklift operation

In Ireland, pallet racking in a forklift-served warehouse is work equipment under Part 2, Chapter 2 of the General Application Regulations 2007 (S.I. No. 299/2007), implementing the EU Work Equipment Directive (now Directive 2009/104/EC). installed and located correctly (Reg. 28); stabilised by clamping or some other means where necessary for safety (Reg. 33), in practice erected as per the manufacturer’s instructions with the uprights anchored to the floor; maintained throughout its working life (Reg. 31); and inspected by a competent person after installation and re-assembly, then periodically and by special inspection after an accident, a modification or any other exceptional event, with records kept for 5 years (Reg. 30). Traffic routes must be dimensioned for the number of users and the type of undertaking, pedestrians given sufficient safety clearance where trucks share them, and areas where objects could fall clearly indicated and access controlled (Reg. 14). Health and Safety Authority guidance asks for the maximum safe load prominently marked on all racks, racking checked regularly for damage and uprights protected from impact; its Code of Practice on the Safe Use of Industrial Trucks adds that features of the operating area such as racking should be clearly marked and protected against accidental damage. EN 15635, the European standard on the use and maintenance of storage equipment, is a technical reference for organising those checks, not a legal obligation.

Guidance based on current regulations; it does not replace the legal text or professional advice. · Last checked: 2026-09-08