Racks Point Logo

Tire Shelving

Organise your workshop or commercial garage efficiently with a tyre rack system designed for manual loading of full wheel sets. Ideal for auto repair shops and tyre retailers across Ireland, these steel storage units clear valuable floor space by storing seasonal inventory neatly across adjustable levels. Choose a tyre rack setup tailored to your stock volume, featuring simple boltless assembly and sturdy steel frames. Our two-metre wide modules hold up to 24 wheels and support up to 400 kg per level, offering reliable storage for complete wheel sets.

Applicable regulations in Ireland · Tyre Rack Steel Shelving for Workshops

Domestic use (garage, storage room)

In Ireland, a shelving unit fitted in the garage, attic or utility room of a private home is not governed by workplace safety law: the Safety, Health and Welfare at Work Act 2005 and the General Application Regulations 2007 bind employers, not householders. What does apply is general product safety. Regulation (EU) 2023/988 (GPSR), applicable since 13 December 2024, requires that only safe products be placed on the market (art. 5) and that a distance-selling offer clearly shows the manufacturer's name, postal and electronic address and any safety warnings (art. 19); in Ireland it is enforced by the Competition and Consumer Protection Commission under S.I. No. 726/2024, which also requires that this information, and the safety information supplied with the product, be in English (Reg. 5).. The Consumer Rights Act 2022 adds that goods must come with the installation instructions a consumer may reasonably expect (s. 18) and that an incorrect installation due to shortcomings in those instructions is a lack of conformity (s. 19). Our advice: anchor the unit to the wall against tipping and never exceed the stated maximum load per shelf.

Professional use with manual loading

In Ireland, shelving in a workshop, shop or stockroom with employees is work equipment: the Safety, Health and Welfare at Work (General Application) Regulations 2007 (S.I. No. 299/2007) define that as any installation for use at work (Reg. 2) and set the employer’s duties in Part 2, Chapter 2, giving effect to the EU Work Equipment Directive, now codified as Directive 2009/104/EC: installed and located correctly and suitable for the work (Reg. 28); stabilised by clamping or some other means where necessary for safety (Reg. 33), for a tall unit fixed to the wall; kept safe by adequate maintenance throughout its working life (Reg. 31); and erected or dismantled following the manufacturer’s instructions (Reg. 28(o)). Because a bolted unit’s safety depends on how it is installed, Reg. 30 requires an initial inspection after installation and after re-assembly at any new location, plus periodic inspections by a competent person where it is exposed to conditions causing deterioration, with results kept for 5 years. The Health and Safety Authority’s Work at Height / Falling Objects information sheet asks for the maximum safe load prominently marked on all racks, no overloading, and racking checked regularly for damage and not used until repaired or replaced. EN 15635, the European standard on use and maintenance, is a reference, not a legal obligation.

Guidance based on current regulations; it does not replace the legal text or professional advice. · Last checked: 2026-09-08

All about Tyre Rack Steel Shelving for Workshops

Organising auto workshops and garages requires steel structures built specifically for manual wheel storage. Selecting a tyre rack depends on your inventory volume and space. For compact areas, a grey 45 cm deep frame standing 200 cm high by 150 cm wide offers three adjustable levels holding 300 kg per shelf. Larger fitting bays benefit from a black tyre rack system measuring 200x200x60 cm with 4 levels, supporting 400 kg per level and up to 1,600 kg total module load for complete wheel sets with rims.

Every heavy-duty tyre rack from Racks Point simplifies stock management by storing 20 to 24 wheels per unit shelf-by-shelf. Featuring boltless assembly for rapid installation, these steel units allow mechanics to separate seasonal stock effortlessly. Placing heavier complete wheels on lower tiers and keeping fast-moving sizes accessible creates an efficient workspace without cluttering your floor.

In busy auto repair workshops, commercial garages, and fitting bays, a dedicated tyre rack solves the daily hassle of floor clutter and disorganized stock. These robust steel structures allow mechanics to load full wheel assemblies with rims by hand, placing seasonal sets on adjustable levels for instant retrieval.

Utilising wall space in a stockroom or back shop with heavy-duty tyre racks frees up vital floor area. Ideal for storing winter and summer inventory, these manual storage units help auto trade professionals keep wheel sets neatly sorted by size, boosting overall workshop productivity.

Need help choosing the ideal model? Our technical team will advise you without obligation · info@rackspoint.com · Shipping throughout the European Union.

Racks and shelving for tire storage

Poorly stored tires deform and cost you money: a tire rack stores them vertically, ventilated, and without resting weight on the sidewalls. We offer two families: fixed three-level shelving units with adjustable beams, designed for workshops that rotate wheels daily, and stackable modules of 400 kg with a structure prepared for forklift movement, ideal for tire storage and dealerships that experience seasonal peaks: when tire change season arrives, simply stack another module. Baked enamel steel, easy assembly, and dimensions designed to maximize floor space.